Kreg router fence manual

A single-side, universal-mounting design allows the fence to be securely attached to most router table tops from 3/4" to 1 1/2" (mm) thick. Create a custom router table system to meet all of your routing needs with the Kreg® Precision Router Table Top and Kreg® Multi-Purpose Shop Stand. Owner's Manual; Proposition See what 5/5(5). m) Make sure the router motor is securely clamped in the base before starting the router. n) Always support the workpiece with the fence or start pin. Only use the starter in with router bits that have a guide bearing. o) When using the fence, always position the bit guard over the router bit and as close to the workpiece surface as possible. Step 1. Insert the four ¼” x ¾” Hex Bolts (#31) into the holes (not slots) on the side of the Table Mount (#5) and attach using four ¼” Brass Washers (#17) and four ¼ Hex Nuts (#23). Be sure to use the thicker Hex Nuts and not the thinner Jam Nuts. The bolts should hang loosely at this point.

Step 1. Insert the four ¼” x ¾” Hex Bolts (#31) into the holes (not slots) on the side of the Table Mount (#5) and attach using four ¼” Brass Washers (#17) and four ¼ Hex Nuts (#23). Be sure to use the thicker Hex Nuts and not the thinner Jam Nuts. The bolts should hang loosely at this point. I bought the Kreg Precision Router Table Fence and The Kreg Table Top last December at Woodcraft. Not wanting an open stand, I elected to build an enclosed cabinet (I should take some picture and post). I also added the Kreg Micro-Adjuster to the fence. This is, IMHO, the best router table system on the market. Precision Router Table Fence a) Read, understand, and follow your router manufacturer’s safety warnings and instructions. b) Disconnect the router from power before making adjustments. Never adjust the fence, plate, reducing rings, or any part of the router or router table while the router is running.

Kreg Router Table Switch. Design: Two-plug; controls two independent devices at once; Includes: (1) Multi-Purpose Router Table Switch and owner's manual. Browse Kreg Tool User Manuals by category to get more information on your favorite Kreg Precision Router Table Insert Plate – Predrilled for Triton. For easy installation on your router table. Stability. Four-corner lockdowns give you increased stability for your project. Adjustable. Eight adjustable points.